Dave the Smallmouth whisperer struck again with this monster 7.06 Meanmouth! The Meanmouth is a cross between a Spotted Bass and a smallmouth Bass. They have a spot on their tongues like the Spots do and also have both horizontal and vertical bars.
Here is is a little finesse worm that I’ve caught literally hundreds of big smallmouth bass on over the years. The Zoom Centipede is another of my Go-To lures when I need or want to catch fish. This small worm is a killer for spotted bass, smallmouth, rock bass and largemouth bass.
As you can see from the tackle box above there are only a few colors that I use on a regular basis and of these the green pumpkin is the one I use the most.The other colors are watermelon-seed and June-bug for darker conditions. In the next couple of weeks at least on Pickwick Lake tie on one of these little finesse worms and fish them around rocks, pea gravel, downed tree-tops and along rip-rap shoreline and you’ll catch some big fish. When I’m on Wilson Lake I like to fish the pockets and coves that have downed trees and logs in the backs of pockets.
My Setup: Rod, Reel , Line, etc.
The rod I use are the same ones I use when I fish the Shaky-head worms. Mine is a 7′ medium action rod in a good quality graphite model. I like the St. Croix Rage rod paired with either my favorite Shimano Symetre or Quantum Smoke size 2500 reels. I spool these reels with one of my favorite lines Mr. Crappie Hi-Viz 6 pound monofilament line. I’ve used fluorocarbon in the past as well but really like the mono better. Most of the bites are very lite and I’ll see my line twitch or move off to one side or another most of the time so the Hi-Viz line is a benefit for me. I’ve caught hundreds of bass on the Hi-Viz line so the fish does not care if it is visible or not.
As for hooks I like Gamakatsu hooks in size #1 or 1/0 in both the 58410 EWG or the 54111 Round bend models. These are both light wire hooks that are required with the light 6 pound test line I use. The use of the medium action rod instead of the medium heavy rod will keep you fro breaking off the fish on the hook-set by allowing the rod to give instead of the line snapping.
As for weights I in the past only used 1/16 or 1/8 ounce lead slip sinkers but now almost exclusively use tungsten weights. The reason I use the tungsten is for two reasons. The first is that tungsten is more dense than lead which gives it a harder feel that transmits through the line and rod for a more sensitive feel of whats on the bottom. When fished around rocks or gravel you can really feel the difference. Sometimes I’m only feeling the bottom composition and when it feels different or I loose contact of the feel then a fish has picked up the lure off the bottom. The second reason is what i can rock hopping in that I make my cast out onto rocky structure such as boulders or rip-rap. I watch my Hi-Viz line for it to go slack and at the instance that it does I hop the worm off the bottom about 6 inches to a foot not really allowing the worm to settle flat back on the bottom. This causes the tungsten weight to make a clicking sound when it contacts the rocks. When i used the lead slip sinkers the lead was softer and I do not get the clicking sound.
When fishing the Centipede worm I cast out watching my line sink slowly on a semi-slack line. The instance it makes contact I slowly raise my rod tip up and move the worm as I said 6″ or so and repeat for about 6 feet to 12 feet and then reel in and make another cast. I’m usually fishing for active feeding fish or for fish that are on the beds. Almost all the bites are when the worm moves the fish pick them up and move off to one side or the other. Since the worm and light weight hook and weights have almost no feel to them to the fish they seem to hold on to them a long time. When I detect a fish or bite, I slowly reel down and sweep the rod while reeling in the slack line. Since I’m using a light wire hook the fish will set the hook its self. this way you will not likely snap the line of break off the fish. I like my drag a little on the loose side and will loosen the drag and back-reel on a larger fish. I’ve caught a lot of 5 to 6 pound smallmouth using this method over the years.
Good luck and now try out the little Zoom Centipede worm and see if it also becomes one of your Go-To tools in the tool box…
Ahh the ole grub, this lure was once my favorite lure for big smallmouth bass. I’ve probably caught more smallmouth on these lures than anything else in my tackle box. But then again back then that’s about all i ever threw. A local smallmouth guru Leon Tidwell was the person that got me throwing these little fish magnets. Back in the late 70’s and early 80’s Leon caught lots of huge limits on them. And me being in Quad cities Bass Club with him and the other great anglers such as Ray Gresham, Sam Moody, Paul Cantrell, Jack Nesmith, Johnny Bryant, Wallace Smith just to name a few. We all threw these lures especially when we were on Pickwick Lake home of the world class smallmouth fishing.
When I did throw these baits I used a 5′ to 6′ rod as these were the only thing available at that time. Now I use a 6’6″ or a 7′ medium to medium heavy rod with a Shimano Symetre 2500 spinning reel spooled with 6 or 8 pound line. I like both monofilament and fluorocarbon line. If I’m around a lot of rock or shell-beds then I’ll use the mono instead of the fluorocarbon line for the extra abrasion resistance.
How I fish the grubs, the first thing is make sure there is current running on Pickwick especially. I like anything over about 50,000 cps current flow for the grubs to work their magic. On Pickwick I love to anchor while fishing, I discovered a long time ago that if you catch two fish and for sure three fish off of a spot then there will be lots of schooling fish around the area.
My favorite grubs were Harville that are no longer made in the 5″ length and of course the smoke with silver glitter on a 1/4 ounce lead-head. Action Plastics made a good grub back years ago that I caught a lot of bass on in their 3″ version of the same color. Pearl white along with chartreuse and pearl chartreuse were other favorites if the water was stained or muddy.
I’ll make a long cast upstream ahead of the shell mound and let the grub rigged on either a 1/4 or 3/8 ounce lead-head depending on the current flow. I work the grubs two different way, the first is to allow the grub to land on the bottom, and allow the current to slow roll along the bottom while very slowly reeling in the slack line. If the current is really rolling then I’ll use the 3/8 ounce lead-heads to keep it on or very near the bottom. And the second way is, once the lure hits the bottom start your slow retrieve and don’t stop, twitch or impart any extra action to the grubs. About the only thing I will do is that if I’m fishing near a sudden bottom structure change such as a drop-off or stair stepping bluff walls with several ledges under the water. I’ll allow my grub to sink back down to the bottom and start my retrieve again with the non-stop retrieve.
Almost all the bites will be very light with the smallies just coming from behind and inhaling the grub and just swim off with it. Sometimes they will hammer the grub with a sudden hard jar. This usually happens when there are a lot of active fish that are competing over the bait. Another fish the drum, will knock the heck out of the grub as will catfish.
So get a few lead-heads and grubs and see if you have as much luck on them as I did.
Marty McCravey sent me this photo of the catch his brother Dustin McCravey and he caught this past Saturday while fishing the Heartland Tournament out of Pickwick Lake. They came in 2nd place with this stringer of 24.3 pounds. It took a little over 27 pounds to take the win. Looks like the big girls are biting.
Dave – The Smallmouth Whisperer sent me this photo of another huge smallmouth he caught yesterday on The Alabama Rig. This smallie pulled down the scales to 6.11 pounds.
Check out this huge smallmouth caught by Dave on a recent fishing trip. this one was 6.10 pounds.