Category Archives: My Tackle Box

Bull Shad vs. BD Shad

BS_BD_Shad

The Bull Shad is on the bottom and the BD Shad on top.

In this blog I’ll discuss the difference between the original Bull Shad swimbait versus the spin-off BD Shad from Trophy Technology LLC. First of the Bull Shad is a homemade swimbait hand made in the U.S. versus the BD Shad mass produced from China. I’ll give the Bull Shad the thumbs up for the lure being made in the U.S. not in China to increase the bottom line.

There is quite a difference in the price of these two swimbaits. The price was obtained from Tackle Warehoue and there could be lower and higher prices out there if you search around for them. The Bull Shad sells for $49.99 were as the BD Shad sells for $24.99. So I’ll give the lower price a thumbs up as I can purchase two BD Shads for the price of one of the Bull Shads.

As for the color pattern I bought both swimbaits in the Gizzard Shad pattern as that is one of the dominate forage fish in my area on the Tennessee River system. As for the paint job I have to give the BD Shad another thumbs up as the Bull Shad looks like a very quick paint job with very little detail. The Kill Spot on both lures is a single vertical line instead of a round or oval dot from the real bait fish.

BD_Shad BS_Shad

Both lures are the same length at 6″ from the nose to the tail not including the carbon fiber tails. As for weight there is on a .1 ounce difference between the two in that the Bull Shad weighted in at 2.1 ounces and the BD Shad weighing in at 2.2 ounces. This could be because of the larger cheaper hooks on the BD Shad that has cheap bronze hooks where as the Bull Shad has Owner 2X black nickel hooks and Hyperwire split rings. I’ll give the Bull Shad the thumbs up for the better hooks and the slightly lighter weight.

joints

Looking at the way the swimbaits are made I’ll look at the joints of the two lures. AS you can see in the above photo there is a difference between the two body joints. On the BD Shad on the left you can see the angled body which will cause the swimbait to have a wider snake like swimming action. The Bull Shad has a flat even front edge with causes the swimbait to swim with a tighter more natural swimming action. For this I’ll give the thumbs up to the Bull Shad for it’s more natural swimming action.

Magnet

Now lets look at the BD Shad on the left and we’ll see there is a small rare earth magnet molded into the swimbait. This is placed there as a hook holder that causes the front hook to lay flat along the body and not hang down as it does on the Bull Shad. The front hook hanger is also moved forward on the BD Shad more than on the Bull Shad. So I’ll give a thumbs up to the BD Shad for this innovation.

Tails

 Now the last thing I’ll talk about is the tails on the two swimbaits. As you can see from the photo above both have carbon fiber tails. The Bull Shad is on the left and the BD Shad on the right. I have seen some of the BD Shads that have really fast cut tails that are not true to form. To me the Bull Shad looks more natural so I’ll give the thumbs up to the Bull Shad.

In conclusion I’ll have to say I prefer the Bull Shad over the BD Shad first because it’s American made not in China. I like the swimming action better than the BD Shad and finally because Mike Bucca uses high quality hooks and split rings on his swimbaits. Thumbs up to the Bull Shad!

Note: I had to purchase both swimbaits and have not been contacted by either manufacturers of the swimbaits. This is my opinion only and yours might be different.

My Tackle Box – Zoom Centipedes

Here is is a little finesse worm that I’ve caught literally hundreds of big smallmouth bass on over the years. The Zoom Centipede is another of my Go-To lures when I need or want to catch fish. This small worm is a killer for spotted bass, smallmouth, rock bass and largemouth bass.

centipedesAs you can see from the tackle box above there are only a few colors that I use on a regular basis and of these the green pumpkin is the one I use the most.The other colors are watermelon-seed and June-bug for darker conditions. In the next couple of weeks at least on Pickwick Lake tie on one of these little finesse worms and fish them around rocks, pea gravel, downed tree-tops and along rip-rap shoreline and you’ll catch some big fish. When I’m on Wilson Lake I like to fish the pockets and coves that have downed trees and logs in the backs of pockets.

My Setup: Rod, Reel , Line, etc.

The rod I use are the same ones I use when I fish the Shaky-head worms. Mine is a 7′ medium action rod in a good quality graphite model. I like the St. Croix Rage rod paired with either my favorite Shimano Symetre or Quantum Smoke size 2500 reels. I spool these reels with one of my favorite lines Mr. Crappie Hi-Viz 6 pound monofilament line. I’ve used fluorocarbon in the past as well but really like the mono better. Most of the bites are very lite and I’ll see my line twitch or move off to one side or another most of the time so the Hi-Viz line is a benefit for me. I’ve caught hundreds of bass on the Hi-Viz line so the fish does not care if it is visible or not.

As for hooks I like Gamakatsu hooks in size #1 or 1/0 in both the 58410  EWG or the 54111 Round bend models. These are both light wire hooks that are required with the light 6 pound test line I use. The use of the medium action rod instead of the medium heavy rod will keep you fro breaking off the fish on the hook-set by allowing the rod to give instead of the line snapping.

As for weights I in the past only used 1/16 or 1/8 ounce lead slip sinkers but now almost exclusively use tungsten weights. The reason I use the tungsten is for two reasons. The first is that tungsten is more dense than lead which gives it a harder feel that transmits through the line and rod for a more sensitive feel of whats on the bottom. When fished around rocks or gravel you can really feel the difference. Sometimes I’m only feeling the bottom composition and when it feels different or I loose contact of the feel then a fish has picked up the lure off the bottom. The second reason is what i can rock hopping in that I make my cast out onto rocky structure such as boulders or rip-rap. I watch my Hi-Viz line for it to go slack and at the instance that it does I hop the worm off the bottom about 6 inches to a foot not really allowing the worm to settle flat back on the bottom. This causes the tungsten weight to make a clicking sound when it contacts the rocks. When i used the lead slip sinkers the lead was softer and I do not get the clicking sound.

When fishing the Centipede worm I cast out watching my line sink slowly on a semi-slack line. The instance it makes contact I slowly raise my rod tip up and move the worm as I said 6″ or so and repeat for about 6 feet to 12 feet and then reel in and make another cast. I’m usually fishing for active feeding fish or for fish that are on the beds. Almost all the bites are when the worm moves the fish pick them up and move off to one side or the other. Since the worm and light weight hook and weights have almost no feel to them to the fish they seem to hold on to them a long time. When I detect a fish or bite, I slowly reel down and sweep the rod while reeling in the slack line. Since I’m using a light wire hook the fish will set the hook its self. this way you will not likely snap the line of break off the fish. I like my drag a little on the loose side and will loosen the drag and back-reel on a larger fish. I’ve caught a lot of 5 to 6 pound smallmouth using this method over the years.

Good luck and now try out the little Zoom Centipede worm and see if it also becomes one of your Go-To tools in the tool box…

My Tackle Box – Shakyhead

Here is my go to box anytime I just want to catch bass, it is my Shakyhead box. This little technique was introduced to me by an old fishing buddy years ago. Before the shakyhead was a popular and now well known way to catch fish my buddy and I were winning tournaments and catching lots of fish on them,

shakyboxMy buddy called me on his way home from a fishing trip in south Alabama and was telling me about a black man he had drawn out for the tournament. He told me that the guy was using a bait-casting rod turning it upside down and putting a spinning reel on it. Then taking a 1/4 ounce lead-head jig that he painted with fingernail paint. Putting on a Zoom Trick worm and tossing it out and shaking it and was catching a lot of fish on it! I thought what the heck you gotta be kidding me.

The next weekend I was heading to Waterloo to fish for crappie but of course the wind was howling about 15 to 20 mph where I wanted to fish. I quit the crappie fishing and got out my Carolina rig rod and caught a couple of fish on it. While unhooking a fish and sitting in the bottom of my boat I saw a 1/4 ounce lead-head laying there and thought back to the conversation I had had with my buddy about the shakyhead. I thought what the heck and dug out one of my spinning rods with six pound test line on it and rigged up the lead-head and a Zoom Finesse worm as I did not have any Trick worms. Now remember I had never seen or talked to anyone that had fished it. So I made my first cast with the thing and since I did not know how to fish it, I let the worm hit the bottom and started to really shake the thing with hard high hops of about two to three feet hops. Wham, fish on and it was one about four pounds. I thought good grief this thing really works! To make a long story short I caught at leat fifteen bass including another one over five pounds shaky-heading!

On the way home from the lake I called my buddy and told him about the results I had had with the rig and told him we had to go to Wilson Lake the next day and try it out there. At that time there was a 15″ length limit on Wilson Lake and we caught about 35 keeper size bass on the setup. With me hard shaking it and him slowly hopping it on the bottom as your were suppose to. But I caught almost as many fish as he did fishing it my way.

I told him not to tell anyone about it and we named it the Brother Man so no one else would know about what we were fishing. We went on to finish up in the local club we were in first and third place that year with most of our catches on the Shakyhead!  I fished a local pot tournament with another buddy and we won a lot of cash using the shakyhead and no one knew what we were throwing as we always hid our rods before we returned to the ramp.

How to Rig and fish the Shakyhead:

Rigging: I personally use the following setup and I know that others may laugh at me but I know it works for me and a few of my buddies. The rod I use is a 7′ medium action rod with a fast tip. The medium action rod is important since I use Mr. Crappie Hi-viz 6 pound test line.  the medium action rod allows the rod to give a little so i don’t break off the lure on the hook set. The reel is of course the same spinning reels I use for all my other spinning rod fishing the Shimano Symetre 2500FL reels. The lead-heads I use are hand poured from a Do-It mold that I modified to accept Mustad 38109BLN jig hooks in 3/0 and 4/0 sizes. I also mold in the wire screw locks to make my worms last longer. With this hook I get solid hook up and seldom lose any bass. The weight of the heads I use which I never paint is 3/16 ounce 95% of the time. Since the lead head is always on the bottom I think the painted head is unnecessary. The worm I like best is the Zoom Trick worm in Green Pumpkin or Watermelonseed colors. I usually dip about a 1/2 inch of the tail in homemade chartreuse dipping dye just for confidence.

Fishing: How I fish the shakyhead it to make my cast near or next to the structure and allow the rig to settle to the bottom on a semi-slack line while I watch my Hi-viz line as it settles to the bottom. When the line goes slack I know the lure is on the bottom. before i move the lure I slowly raise the rod tip just to take the the slack line out. I’m trying to feel if a fish has picked up the worm. If so I will feel it get taut or a slight mushy feel to it or I’ll see the line slowly move off to one side. If i don’t feel anything I’ll slowly shake the worm with the tip of my rod about a foot and let it settle back to the bottom and repeat the process of slowly taking the slack line out to again feel for a bite. I’ll do this for about 6 feet or so and reel it in and make another cast.

One of the best five fish limits I had was about 27 pounds all caught on a shakyhead. I caught and released at least a dozen four pound fish that day on the rig catching over 35 bass that day. Almost all the big fish I never felt hit the lure i just lifted my rod and there was a mushy feel to the worm. So if you want to catch a lot of fish learn to fish the shakyhead and see if it becomes one of your go to lures.

My Tackle Box – Grubs

Ahh the ole grub, this lure was once my favorite lure for big smallmouth bass. I’ve probably caught more smallmouth on these lures than anything else in my tackle box. But then again back then that’s about all i ever threw. A local smallmouth guru Leon Tidwell was the person that got me throwing these little fish magnets. Back in the late 70’s and early 80’s Leon caught lots of huge limits on them. And me being in Quad cities Bass Club with him and the other great anglers such as Ray Gresham, Sam Moody, Paul Cantrell, Jack Nesmith, Johnny Bryant, Wallace Smith just to name a few. We all threw these lures especially when we were on Pickwick Lake home of the world class smallmouth fishing.

grubs

When I did throw these baits I used a 5′ to 6′ rod as these were the only thing available at that time. Now I use a 6’6″ or a 7′ medium to medium heavy rod with a Shimano Symetre 2500 spinning reel spooled with 6 or 8 pound line. I like both monofilament and fluorocarbon line. If I’m around a lot of rock or shell-beds then I’ll use the mono instead of the fluorocarbon line for the extra abrasion resistance.jigheads

How I fish the grubs, the first thing is make sure there is current running on Pickwick especially. I like anything over about 50,000 cps current flow for the grubs to work their magic. On Pickwick I love to anchor while fishing, I discovered a long time ago that if you catch two fish and for sure three fish off of a spot then there will be lots of schooling fish around the area.

My favorite grubs were Harville that are no longer made in the 5″ length and of course the smoke with silver glitter on a 1/4 ounce lead-head. Action Plastics made a good grub back years ago that I caught a lot of bass on in their 3″ version of the same color. Pearl white along with chartreuse and pearl chartreuse were other favorites if the water was stained or muddy.

I’ll make a long cast upstream ahead of the shell mound and let the grub rigged on either a 1/4 or 3/8 ounce lead-head depending on the current flow. I work the grubs two different way, the first is to allow the grub to land on the bottom, and allow the current to slow roll along the bottom while very slowly reeling in the slack line. If the current is really rolling then I’ll use the 3/8 ounce lead-heads to keep it on or very near the bottom. And the second way is, once the lure hits the bottom start your slow retrieve and don’t stop, twitch or impart any extra action to the grubs. About the only thing I will do is that if I’m fishing near a sudden bottom structure change such as a drop-off or stair stepping bluff walls with several ledges under the water. I’ll allow my grub to sink back down to the bottom and start my retrieve again with the non-stop retrieve.

Almost all the bites will be very light with the smallies just coming from behind and inhaling the grub and just swim off with it. Sometimes they will hammer the grub with a sudden hard jar. This usually happens when there are a lot of active fish that are competing over the bait. Another fish the drum, will knock the heck out of the grub as will catfish.

So get a few lead-heads and grubs and see if you have as much luck on them as I did.

My Tackle Box – Hair Jigs

Here is my hair jig box that I depend on mostly during the cold water months and in the late fall season. Most of my hair jigs are as you can see are black. The white ones are used mostly for smallmouth fishing. When fishing these lures I use the cast and drop method in that I make a long cast and let the hair-jig slowly drop to the bottom.

hairjigs

The equipment that I use is a 6’6″ to 7′ medium action spinning rod, of course the more sensitive the better. I use a Shimano Symetre 2500 spinning reel spooled with 4 to 6 pound fluorocarbon line or the same sizes in monofilament except I use Mr. Crappie Hi-Viz line so I can watch the line as it falls. Jig weights I use vary from 1/8 ounce up to 3/8 ounce most of the time. In the summer when the bass get in those huge schools out on the ledges I throw a jig up to 3/4 ounce and then I’ll just work it fast with hops off the bottom. When I use a trailer they are usually either a Zoom Split Tail Trailer or their Salty Pro Chunk.

 The best places to fish these are usually on steeper structure such as bluffs, main lake drop offs and steep end main lake point drop offs. Rate of fall (ROF) is the important thing to remember when fishing hair-jigs. Make a cast and watch your line as it sinks, almost all hits will be on the first drop. Fish are very aware of their surrounding area and anything that comes through it will be detected. I count the lure down and watch my line as it settles to determine the rate of fall. When the jig hits bottom I jerk it off the bottom with a sharp upwards jerk of my rod and watch the line as it settles back down. If nothing has hit the lure or no hits then I’ll real in and make another cast about ten feet further away and start all over again.

Add a few of these tools to your tool box and get out there and learn to fish them and they will put a few more fish in your live-well.

My Tackle Box – Flippin Box

Here is my flippin component toolbox that I use to put together my system. I prefer the straight shank flippin style hooks with the plastic keeper taps molded on the shaft. Most of the time I’ll be using 4/0 hooks with the plastic I use. If you noticed the small yellow plastic disk in my box those are bobber stops, I like the 8-12 pound ones to hold my tungsten weights in place. Another thing I like is the lead sinker with the screw-lock molded into them. The way I rig those is to run my line through the bobber-stop then the sinker then through one of the jig skirts usually black and blue or green pumpkin. Next I tie on my hook with either a Double improved clinch knot or a Palomar knot. Now I’ll just select the type of trailer I want to use to suit the conditions and rig it on weedless.

flippinThe setup I use is a St. Croix Mojo 7’11’ Flipping Stick or a 13 Fishing Envy 7’11” flipping Stick with a left hand Shimano Curado 200E7 reel spooled with either 30 to 40 pound Suffix 832 braid or Berkley Big Game Monofilament in 20 pound test. I use the left handed reels so I can make my pitch with my right hand and never have to switch hands to set the hook as the lure slowly drops to the bottom. I won’t go into the flipping process as there are a ton of instructional videos on YouTube.

My Tackle Box – Bladed Jigs

Here is one of my bladed jig (Chatterbaits) boxes. Most of my newer lures are in another bag lost in my boat along with a ton of other tackle I have. As the water is starting to water up and the fish are starting to stage getting ready for the spawn these lures are great search baits. As the days warm up and especially when the days get longer and the light levels are increasing. The bass now want to start their move to the shallow water to feed up getting ready for the spawn that will be starting when the water temperatures get in the upper fifties and lower sixties.

bladejigs

I have a separate bag that I keep my skirts in and I’ll change out skirt colors to match the water color but my favorite one is a chartreuse and white color. The key to using these style lures or tools is to have the right trailer on the jig. I really like a Yamamoto Swimming Senko in white or a similar color. I usually pinch off about an inch or two to downsize the Senko’s. To fish these I prefer a 7′ medium heavy rod on a 6:3.1 geared reel spooled with 15 pound Seaguar Red Label fluorocarbon line. You can fish these around piers and laydowns in shallow water but still near deepwater. When the water warms up or late in the day fish them in the backs of pockets around wood cover. I’ve found a slow steady retrieve works best for me.

My Tackle Box – Swimbait Jigheads

Here are a few of my swimbait heads that I get from LB’s Custom Lures. As you can see there are different styles and different weights. You must remember that all fishing tackle whether it is a rod, a reel, fishing lines (mono, fluoro or braid), hooks, weights, lures, etc. are all just tools that we use to help us catch fish. Now putting these tools to work only comes AFTER we have located the fish we are after, bass, crappie catfish bluegill, etc.

lbsswimbaitjigs_1

We can fish the most beautiful expensive lures around for an example The Alabama Rig and still not catch fish if we are not in the right locations. And all the swimbaits in the photos below are just that tools. Some of these heads are weedless to a point, some are very heavy to be fished dragging the swimbait along the bottom and others lightweight to be fished on top through weeds and weed beds like a buzzbait for example.

lbsswimbaitjigs_2 lbsswimbaitjigs_3

I can have the best tool set in the world and still not be able to work on a car if I don’t know how to use them! So as a beginner start out with a few SIMPLE tools and learn to use them before buying a complete set and NOT knowing their use.

lbsswimbaitjigs_4. LBsunderspins swimheadjigs

As you can see I have quite a collection of different swimbait heads that I carry in my boat.