Here are a few images I captured from my recordings from my Helix 12 Mega Scan and then viewed through DeepView. This program will work with Humminbird Helix and the old Core units such as the 798, 898. 998, 1198, 799, 899, 999 and the 1199 units. You must convert the recording to Son2xtf format to view the recording on you home computer. Check this blog for more information on how to record, convert and view the recording on you home computer. Humminbird Viewing on Your PC
Crappie top placed by a friend.
Shellcracker beds, can you see the fish in the beds?
Carp probably Asian.
Top with crappie.
I had a chance to get out on Pickwick Lake yesterday and do a little fishing and side image recording with my Humminbird Onix 10 SI Cross Touch. While i was scanning in the back of Bear Creek I scanned these old railroad tracks. These tracks are part of the construction of the old canal system that starts t the mouth of First Creek on Wheeler Lake and runs all the way to Waterloo, Alabama. If you want to scan the tracks for yourself I posted the GPS coordinates on the photo.
You can see the train the used the tracks now located under Pickwick Lake.
U.S. Army Corps of Engineers Nashville District Historical Photo: This is a graveling crane and stone yard at Riverson, Ala., which is supporting the Colbert Shoals Canal project Nov. 8, 1895.
Here is a drawing of the canal lock that is submerged under Pickwick Lake that is across the river from Waterloo.
Construction of the Riverton canal, as you can see there was a lot of manual labor involved in the construction.
Setting the stones used in the construction of the lock. Most of the stones were cut from quarries up and down the Tennessee River. Keller quarry was one such place and you can still see some of the cut stones located there to this day.
Stones set in place as part of the Riverton canal.
Upriver entrance going into the entrance of the Riverton lock.
Down river gate exiting from the Riverton lock.
Humminbird Onix Side Image scan of the old Riverton Lock.
If you want to take a look at the lock with your Side and down Image units here is the GPS coordinates: N34.53.851 – W088.04.048 enjoy.
I like to record from my Side Image and Down Image units as I’m fishing. I usually try to spend the last 15 minutes or so of my day on the water recording what my units is scanning. If you don’t know how to do this there are a few older blogs on this site that will show you what you need and how to do it. Just do a search for RECORDING from the search bar on the right side of the screen.
As it was recording yesterday I found this old auto frame in Pickwick Lake. To me it looks like the frame might be the only thing left. Since it is upside down I can’t tell if it’s a truck or car frame. I’ll try to get a better image of it the next time I’m in the area. If you would like to take a look at it here are the GPS coordinates: N 34 46.333 – W087 42.199