Monthly Archives: April 2015

How to Convert Lowrance Waypoints to Humminbird Waypoints

Convert Lowrance to Humminbird waypoints. .usr to  .hwr

Humminbird PC

Step 1: Launch your free copy of Humminbird PC

HumminbirdPC 4/24/2015 , 2:58:50 PM HumminbirdPC 4.4.6

Step 2: Open the Lowrance file that you want to convert. The file will have an extension that ends in (.usr).
HumminbirdPC 4/24/2015 , 3:00:48 PM Open [SCM]actwin,93,78,691,511;

Step 3:  You will get a pop up message that lets you know that the Lowrance is not a .gpx file but asks if you want to convert it to one.
HumminbirdPC 4/24/2015 , 3:02:17 PM HumminbirdPC 4.4.6 [SCM]actwin,19,36,459,216;HumminbirdPC 4/24/2015 , 3:02:54 PM Import File [SCM]actwin,13,18,563,196;

Step 4: Once the file is converted to the gpx format you will see a file created that has both the usr and gpx file name as shown below with the name Bob.usr.gpx.

HumminbirdPC 4/24/2015 , 3:03:54 PM HumminbirdPC 4.4.6
Step 5: Now insert a blank formatted SD card into your pc’s SD slot and an icon will pop up in Humminbird PC.

Note if you have an Onix unit then you do not convert the files in Step 5 or Step 6 but just copy the file to the SD card with the file extension that ends with the (.gpx ).
HumminbirdPC 4/24/2015 , 3:10:32 PM HumminbirdPC 4.4.6

Step 6: Then next step is to select Add from the window that pops up.
HumminbirdPC 4/24/2015 , 3:11:41 PM Uploading GPX Files From PC [SCM]actwin,100,129,540,254;

Step 7: Once the file is written to the SD card you will get a Upload successful pop up window.
HumminbirdPC 4/24/2015 , 3:12:23 PM HumminbirdPC 4.4.6 [SCM]actwin,94,135,362,251;

Step 8: On the SD card a folder was created named (matrix ) that the Lowrance converted waypoints were written into.
Explorer 4/24/2015 , 3:13:26 PM BOB0004 (F:)
Step 9: If you open this folder the files will have the extensions that are (ht, hwr ).

Explorer 4/24/2015 , 3:14:08 PM matrix

My Tackle Box – Zoom Centipedes

Here is is a little finesse worm that I’ve caught literally hundreds of big smallmouth bass on over the years. The Zoom Centipede is another of my Go-To lures when I need or want to catch fish. This small worm is a killer for spotted bass, smallmouth, rock bass and largemouth bass.

centipedesAs you can see from the tackle box above there are only a few colors that I use on a regular basis and of these the green pumpkin is the one I use the most.The other colors are watermelon-seed and June-bug for darker conditions. In the next couple of weeks at least on Pickwick Lake tie on one of these little finesse worms and fish them around rocks, pea gravel, downed tree-tops and along rip-rap shoreline and you’ll catch some big fish. When I’m on Wilson Lake I like to fish the pockets and coves that have downed trees and logs in the backs of pockets.

My Setup: Rod, Reel , Line, etc.

The rod I use are the same ones I use when I fish the Shaky-head worms. Mine is a 7′ medium action rod in a good quality graphite model. I like the St. Croix Rage rod paired with either my favorite Shimano Symetre or Quantum Smoke size 2500 reels. I spool these reels with one of my favorite lines Mr. Crappie Hi-Viz 6 pound monofilament line. I’ve used fluorocarbon in the past as well but really like the mono better. Most of the bites are very lite and I’ll see my line twitch or move off to one side or another most of the time so the Hi-Viz line is a benefit for me. I’ve caught hundreds of bass on the Hi-Viz line so the fish does not care if it is visible or not.

As for hooks I like Gamakatsu hooks in size #1 or 1/0 in both the 58410  EWG or the 54111 Round bend models. These are both light wire hooks that are required with the light 6 pound test line I use. The use of the medium action rod instead of the medium heavy rod will keep you fro breaking off the fish on the hook-set by allowing the rod to give instead of the line snapping.

As for weights I in the past only used 1/16 or 1/8 ounce lead slip sinkers but now almost exclusively use tungsten weights. The reason I use the tungsten is for two reasons. The first is that tungsten is more dense than lead which gives it a harder feel that transmits through the line and rod for a more sensitive feel of whats on the bottom. When fished around rocks or gravel you can really feel the difference. Sometimes I’m only feeling the bottom composition and when it feels different or I loose contact of the feel then a fish has picked up the lure off the bottom. The second reason is what i can rock hopping in that I make my cast out onto rocky structure such as boulders or rip-rap. I watch my Hi-Viz line for it to go slack and at the instance that it does I hop the worm off the bottom about 6 inches to a foot not really allowing the worm to settle flat back on the bottom. This causes the tungsten weight to make a clicking sound when it contacts the rocks. When i used the lead slip sinkers the lead was softer and I do not get the clicking sound.

When fishing the Centipede worm I cast out watching my line sink slowly on a semi-slack line. The instance it makes contact I slowly raise my rod tip up and move the worm as I said 6″ or so and repeat for about 6 feet to 12 feet and then reel in and make another cast. I’m usually fishing for active feeding fish or for fish that are on the beds. Almost all the bites are when the worm moves the fish pick them up and move off to one side or the other. Since the worm and light weight hook and weights have almost no feel to them to the fish they seem to hold on to them a long time. When I detect a fish or bite, I slowly reel down and sweep the rod while reeling in the slack line. Since I’m using a light wire hook the fish will set the hook its self. this way you will not likely snap the line of break off the fish. I like my drag a little on the loose side and will loosen the drag and back-reel on a larger fish. I’ve caught a lot of 5 to 6 pound smallmouth using this method over the years.

Good luck and now try out the little Zoom Centipede worm and see if it also becomes one of your Go-To tools in the tool box…