I’ve seen on a couple of forums that Humminbird users can’t mark and save waypoints on their units. So I thought I’d do a blog on how to correct this problem, which is a simple solution to fix. Just follow the menu change in the following photos to fix this issue.
In this photo you can see that I have pressed the Mark button to create a waypoint on the map screen. The unit shows Successfully saved which in reality it would only save a snap shot of the screen but did not create a waypoint.
But when we press the Menu button once and scroll down to the waypoint, the unit did not create a waypoint. Now to verify that the waypoint was not created we can check this by doing the following. Press the Menu button twice select the Nav tab at the top.
Now let’s start over and make a few changes to the unit so it will be able to create a waypoint when the Mark button is pressed. Press the Menu button twice to go back to the main menu options screen. Scroll over to the Accessories tab at the top.
Scroll down to the Screen Snapshot option and you can see it is set to On this being set to On is the reason it will not allow you to save a waypoint on the unit. Let’s make a change to the menu Screen Snapshot option screen and arrow to the right to change it from On to Off.Now let’s exit out of the Menu screen and go back to the Chart screen. Now when we press the Mark button to create a waypoint. Now you can see that the waypoint WP001 was created.
Now when we press the Menu button once we see that the Waypoint WP001 is now showing up in the options menu. If you scroll down to the waypoint and pres the Right arrow button we can Edit the waypoint, Goto the waypoint etc.
Good luck hope this helps you better learn the features on your Humminbird units.